Reloop RMX-44BT + RP-7000 MK2 Turntable Vinyl Bundle

Descriptions:

Bundle includes 1x Reloop RMX-44BT and 2 x RP-7000 MK2 Turntable, 2 x phono cables and 1 x HF125 headphones

Reloop RMX-44BT 4-Channel Bluetooth Mixer:

MULTI-FUNCTIONAL
The Reloop RMX-44 BT is a 4-channel Bluetooth DJ club mixer in classic design, including a Bluetooth input with cue function, which offers numerous application possibilities. The intuitive Club mixer layout guarantees a simple overview and allows experienced artists to find their way around immediately.

FLEXIBLE USABILITY
With 9 inputs and 4 outputs, as well as a 3-band EQ and bipolar filter unit per channel, the RMX-44 BT is not only a full-fledged DJ club mixer, but thanks to Bluetooth compatibility and the 2-band EQ microphone section with talk-over function, it is also ideal for bars, mobile DJs and home setups.

UNIVERSAL CONNECTIVITY
Thanks to the Smart Connectivity Bluetooth input, Smartphones, laptops as well as iPad’s and other devices can be connected quick and easily. In combination with its numerous other connection opportunities, the RMX-44 BT is up to any challenge and adapts perfectly to any application.

FREQUENCY MIXING IN DIGITAL SOUND ARCHITECTURE
For creative frequency mixing, the RMX-44 BT offers dedicated, bi-polar sound filters per channel to allow smooth low- and high-pass fading. The fully digital sound architecture enhances your sound to be clear and punchy in every situation.

HIGH QUALITY DESIGN
The sturdy metal construction and scratch-resistant surface with a deep black metallic finish make the RMX-44 BT extremely durable, despite frequent use and transport. The fabrication meets the industry’s highest quality standards and is visually and haptically particularly attractive. In addition, the stylish and timeless design blends perfectly into any DJ setup.

Features:

4-channel Bluetooth DJ club mixer
9 inputs, 4 outputs
Symmetrical (XLR) as well as asymmetrical (RCA) outputs
Smart connectivity Bluetooth input with cue function
3-band EQ
Sound filter, bi-polar filter unit with LPF and HPF
High-quality surface in deep black metallic
Sturdy metal construction
RMX Innofader compatible
Crossfader curve adjust
Mic channel with 2-band EQ & talk-over ''Active Ducking Technology'' for mic channel
Headphones output (6.3 mm jack)
Incl. power cord, instruction manual
TECHNICAL DATA
Frequency range 20 Hz – 20kHz
Inputs: 2x Phono RCA, 6x Line RCA, 1x Mic XLR/Jack
Outputs: 1 Master XLR (balanced), Master RCA (unbalanced), Booth RCA (unbalanced), Rec RCA (unbalanced), headphones (6,3 mm jack)
EQ range classic at 70 Hz, 1 kHz, 13 kHz: -8 dB/+9 dB
Dimensions: 320 x 106.4 x 379.4 mm
Weight: 5,4 Kg

Reloop RP-7000 MK2 Black

With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

NextGen Turntable for professional Club DJs and Turntablists
Power-Torque Direct Drive with precise motor control and stable rotation
Extra-heavy body design with high-rigidity for excellent damping, isolation and sound

Specifications:

Turntable
Type: direct-drive turntable
Drive: quartz driven upper-torque direct drive
Motor: 16-pole, 3-phase, brushless motor
Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
Starting torque: 2.8 – 4.5 kg/cm (adjustable)
Adjustable stop time (0.2 - 6 sec.)
Start-up time / change to RPM: <0.2 sec
Wow and flutter: 0.01% WRMS*
S/N ratio: > 55dB (DIN-B)
Brake system: electronic brake

Platter
Material: die cast aluminium
Diameter: 332 mm
Weight: approx. 1.5 kg

Tone arm
Type: universal, static balanced, S-shaped
Effective length: 230 mm
Overhang: 15 mm
Tracking error range: < 3°
Offset Angle: 22°
Stylus Pressure: 0 - 4 g
VTA setting range: 0-6 mm
Useable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)
Anti-skating range: 0 – 3 g
Effective tone arm mass: 12.8 g (incl. headshell)

Connections
1x PHONO/LINE Out (gold-plated), 1x GND earth connection

General
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power consumption: 13 W

Dimensions
458 x 354 x 144.6 mm

Weight
11.7 kg

Numark HF125 Headphones:

Engineered for the modern DJ, the Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a moulded 1/8” TRS connector (a 1/8” to ¼” TRS adapter included), plus a padded headband and ear cups for superior comfort during late night mixing sessions. Looking to enter the world of DJ-ing or seeking a set-ready pair of headphones as a backup, put this DJ essential on your kit list!

Monitoring essential - Ultra light DJ headphones with seven different independently-adjustable position settings caters for any mixing preference
Superior comfort – Lightweight design fused with a padded headband and ear cushions keep you focussed on what’s important - your mix
Great isolation - Closed back design reduces ambient noise so you hear only what you need to
Connect to anything - 6-ft hard wired cord with a moulded 1/8 Inch TRS connector, plus a 1/8 Inch to ¼ Inch TRS adapter included, connects to virtually any DJ mixer
Hassle free setup - Tangle-resistant cord to keep your focus routed on your performance