Robolights Grey Smart Socket Set for 13A/15A (SSS/15A/G)

Description

This Smart Socket kit includes a front lid that takes a 15A BS546 round pin or a 13A BS1363 rectangular pin (UK standard) socket outlet. All Smart Sockets are injection moulded in tough, resilient ABS and comprise of 3 parts, the body, lid and clamp. Kits are shipped with all the necessary screws to assemble them along with full fitting instructions. Smart Sockets are designed for use with standard, 48.3mm outside diameter aluminium scaffold tubing; to fit them you only need to drill a single 16mm hole in one wall of the tube. Then, simply press the Smart Socket into place and tighten the 2 self tapping screws; you can then install the wiring for your lighting bar.

Specifications

• Designed for 48.3mm outside diameter aluminium scaffold tubing
• Shipped all the necessary screws and full fitting instructions
• Requires 13A or 15A socket (available separately)
• Note: The Robolights SmartSocket should only be installed by a suitably qualified person
• The installer must also ensure that the final assembly conforms to and is in accordance with, all regional electrical wiring regulations prevailing at any time.