RANE ONE Professional Motorised DJ Controller

Description:

Their first complete DJ controller features 2 motorised 7.2 inch platters with real vinyl and a built in high quality scratch mixer. 

Laid out like a traditional DJ controller, it has a high torque, direct drive deck with a 7.2 inch platter. The platter has a real slipmat and 7"vinyl with a quick release to allow the installation of a custom vinyl to change the look of your controller.

Each side also has a full length pitch slider, 8 RGB performance pads and a touch strip for needle drops.

There is also a setting for adjusting the start and stop time, dedicated looping controls and the large RANE industrial Start/Stop button.

The mixer is a typical RANE scratch mixer, similar to the RANE SEVENTY with their new MAG FOUR crossfader for super smooth response and durability.

You get the standard 3 band EQ and filter which can also be used with the external inputs. Software FX can easily be triggered with large paddle switches which can be latched on or temporary.

Connect two turntables or multiplayers and get DVS control over the software.

Connectivity wise, the ONE has 2 mic inputs on XLR/ TRS combination sockets, master and booth outputs on XLR as well as RCA inputs for bot channels and AUX. There are also 2 USB connectors to allow for 2 computers to be connected simultaniously for back to back DJ sets.

Supports Serato DJ Pro as standard and activates it straight away. You get all the new Serato features including scratch banks.

It has the typical 'tank like' build quality found in all the RANE products with high quality components and metal casing.

Features:

2 channel Serato DJ controller
7.2" direct drive motorised platters
16 RGB performance pads
MAG FOUR Crossfader
FX paddle triggers
XLR outputs
Dual USB connectors

Specifications:

Digital Audio
Converters : Cirrus Logic, 24-bit PCM, 48kH

Digital Signal Processing :32-bit, Floating Pont, Double precision

Dynamic Range (A-weighted, unity gain)

ADC: 113dB
DAC: 113dB
CD Input to Analog Output: 110dB
CD Input to USB Output: 113dB
USB Input to Analog Output: 113dB
Inputs

Microphone 1/2 (Combo XLR/1/4” [6.35mm] TRS, Mic/Line switchable)

Analog Gain: 25dB
Maximum Input: 110mV
Gain Trim: Off to +26dB (unity at center)
Tone Control: 2-band
Aux Input (RCA stereo pair)

Maximum Input: 4Vrms
Dynamic Range (A-weighted): 114dB
Gain Trim: Off to +12dB
Tone Control: 2-band
CD/Phono Inputs 1/2 (RCA stereo pairs, switchable)

CD: Line
Maximum Input: 4Vrms
Gain Trim: Off to +12dB
Tone Control: 3-band, full-cut to +10dB
THD+N (20kHz BW @ 1kHz): 0.004%
Phono: RIAA
RIAA Curve: +/-0.25dB
Gain (@ 1kHz): 31.5dB
Maximum Input (@ 1kHz): 106mV
Dynamic Range (A-weighted): 102dB
Outputs

Main Outputs (XLR)
Gain Trim: Off to 0dB
Maximum Output: 8Vrms
THD+N (20kHz BW @ 1kHz): 0.004%
Frequency Response: Flat
Booth Outputs (XLR)
Gain Trim: Off to 0dB
Maximum Output: 8Vrms
THD+N (20kHz BW @ 1kHz): 0.004%
Frequency Response: Flat
Master Outputs (RCA stereo pair)
Maximum Output: 4Vrms
THD+N (20kHz BW @ 1kHz): 0.004%
Frequency Response: Flat
Headphone Outputs (1/4”/6.35 mm & 1/8”/3.5 mm TRS)
Maximum Output Voltage: 4Vrms (no load): 50mW (50 ohms)
Output Power: 0.004%
Dynamic Range (A-weighted): 108dB
General

Pads
16 velocity-sensitive multi-color back-lit pads (8 per deck, 8 modes each)
Faders
1 MAG FOUR tension-adjustable crossfader with independent Contour and Reverse controls 
2 Standard channel faders with shared Contour and Reverse controls
Connectors
2 XLR outputs (Main)
2 XLR outputs (Booth)
1 RCA stereo output pair (Master)
2 XLR / 1/4” (6.35mm) TRS inputs (Mic 1–2) (2) RCA stereo input pairs (Deck 1–2)
1 RCA stereo input pair (Aux)
1 1/4” (6.35mm) TRS output (Headphones) (1) 1/8” (3.5mm) TRS output (Headphones) 
2 USB Type-B ports
1 IEC power cable input
Power

Connection: IEC
Voltage: 100–240V, 50/60Hz
Consumption: 50W
Dimensions (WxDxH)

26.5” x 13.6” x 4.9”, 674 x 345 x 124.3 mm
Weight (including platters)

23.55 lb. 10.68kg