Martin Audio XP118 Blackline XP 1x18" Powered Subwoofer 2000W Black

Description:

The XP118 is a compact, high performance subwoofer for indoor use with the XP12 and XP15 full-range loudspeakers. It extends the low frequency operating range of the combined system down to 42Hz and can be used singly, stacked in omni or cardioid mode, or flown via integral M10 insets. It features a long-excursion 18” (460mm)/4” (100mm) voice coil driver in a compact enclosure that has four reflex ports with a large frontal area to reduce turbulent air noise at very high levels.

A convection-cooled Class D amplifier module delivers 2000Wpeak output to the driver for maximum low frequency extension and chest-thumping punch. Crossover, EQ, metering and control functions are provided by on-board DSP via a rotary encoder interface and multi-function colour screen on the rear panel.

The XP118 enclosure is built for the road, constructed from durable plywood and finished in textured black paint. A perforated steel grille protects the driver, and the enclosure has a 35mm pole-mount socket in the top surface and two ergonomic side handles. 

Features:

Compact, self-powered subwoofer
1 x 18” (460mm) driver with 4” (100mm) voice coil
2000W of Class D amplification
Global power supply with PFC (Power Factor Correction)
On-board DSP with rotary control interface
Multi-function display for metering, control and function selection
Peak and RMS limiters
Bluetooth® control and streaming option
Durable plywood enclosure
Screw-free, perforated steel grille
Integral ergonomic handles
35mm pole-mount socket

Specifications:

Acoustics
Type: Compact self-powered subwoofer
Frequency response42Hz – 150kHz ±3dB
-10dB @ 38Hz
DriverLF: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet
Maximum spl: 131dB continuous, 137dB peak (Half space)
Dispersion (-6DB): Omnidirectional
Crossover: 100Hz, active
Audio In/Out
Input connectors: 2 x female XLR/ ¼” jack combo
Mic/line input impedance: 8 kΩ balanced
¼” Jack ts input impedance: 1 MΩ unbalanced
Mix output connector: 1 x male XLR
Mix output impedance: 600 Ω Balanced
Internal Processing
Input channel EQ: 3-band
Speaker EQ: 4 presets, including cardioid mode
Protection: Peak and RMS limiting, amplifier thermal protection
Amplifier Module
Type: Class D, Bridged Tied
Peak output power: 2000W total
Average efficiency: 89%
Cooling: Convection
Maximum ambient temperature: 35°C (95°F) for full output
Power Supply
Type: Switch-mode, fixed frequency with PFC
Ac input operating range: 100-240V ~ AC, 50 - 60Hz
Power factor: > 0.98
Nominal power consumption: 1000W Max
Mains connector: 3-pin IEC
Physical & Dimensions
Enclosure: Birch/poplar ply
Finish: Black textured paint
Protective grille: Black perforated steel
Fittings: 16 x M10 inserts, pole-mount socket, 2 x bar handles, provision for castors
Dimensions(W) 662mm x (H) 536mm x (D) 640mm
(W) 26.1in x (H) 21.1in x (D) 25.2in
Weight: 44kg (97lbs)