Laserworld Tarm 11 Outdoor 11,000 mW Laser

Description:

The tarm 11G OUTDOOR are especially designed for outdoor laser installations. They come equipped with the top quality laser setup known from the standard tarm units, but have a waterproof enclosure that not only protects the components inside from water, but also shields off direct heat from solar exposure. A specially designed roof in front of the output window prevents it from getting impacted by direct rain.
To cope with varying temperatures, the tarm OUTDOOR units are equipped with an active watercooling system, that is built into the housing. An active heating system helps to keep the laser systems operational even at low temperatures. Thus the tarm 11G OUTDOOR lasers can be used at environmental temperatures between -10°C and +45°C. A CT Scanner upgrade with LAS Turboscan drivers is available for the tarm 11G OUTDOOR to achieve top end quality graphics results.

The tarm 11G OUTDOOR is made in Germany and is a compact show laser system that is ideally suited for top professional laser show applications of any kind. It is built with the latest RTI semiconductor laser modules that are specially designed in a way to keep spot size as well as divergence equal on both x- and y-axis. This is significantly advantageous over solutions with a very good divergence on one axis, but a bad divergence on the other. The laser modules inside the tarm 11G OUTDOOR are different - the spot size and shape is equal on both axis!

The beam specifications of the new tarm 11G OUTDOOR are given with only ca. 5.0 mm diameter and <0.8 mrad divergence - which applies to both axis. The extremely small beam diameter allows for the use of very small mirrors, which results in reduced inertia and thus very good scanning performance.

KEY FEATURES

11 W total power in a small housing of only 800/370/260 mm
super small spot of ca. 5.0 mm for reduced inertia and thus fast scanning
extremely low divergence of <0.8 mrad - on both axis!
Laser modules do not come out of internal alignment
Maintenance free laser modules
High quality product, Made in Germany
Great scanning performance suitable for projections as well as for beams
The tarm 11G OUTDOOR impresses with a guaranteed RGB output power of 11'000 mW. Great visibility is achieved with the new RTI Semiconductor Laser modules (RSL): 13'000 mW / 525 nm green laser module. The 525nm green provides a warmer green tone than the 520nm diodes and has increased visibility.
These new RSL modules with their extremely low divergence and homogenous beam shape make the tarm 11G OUTDOOR a top professional laser system. The extremely small beam diameter of only ca. 5.0 mm allows for the use of small scanner mirrors which leads to reduced inertia and higher scan speeds. This is especially important, as the tarm 11G OUTDOOR can be used for any kind of laser show application: Super sharp beams and strong green for installation projects and multimedia, especially for crisp graphics.

The RTI Semiconductor Laser modules are maintenance free and do not come out of internal alignment.
The standard scanners can be run at a maximum of 45kpps @ 8° ILDA and a maximum scan angle of 50°. CT-6210 scanners with LAS Turboscan drivers are available as option and provide even higher scan speeds with up to 60kpps at 8° ILDA .

Demanding graphics projections or projections over long distances are possible without any problems, due to the extremely good divergence.

INCLUDING SHOWNET LASER MAINBOARD

The tarm 11G OUTDOOR is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.

If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an ILDA streaming signal - so the external ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the tarm 11G OUTDOOR via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.

IP65 waterproof housing
11'000 mW guaranteed power
Complex graphics capable - 45kpps @ 8° ILDA scanners – upgradable to 60kpps
Extremely sharp intense beams - low divergence of <0.8 mrad
Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
Control screen (internal) for convenient mode selection
Laser Artists' choice
Lighting Designers' choice

Specifications:

Guaranteed Power at aperture 11'000 mW
Power Green 13'000 mW / 525 nm
Beam Specifications* ca. 5.0 mm / <0.8 mrad
Scanner 45kpps @ 8° ILDA; optional CT-6210 with LAS Turboscan: 60 kpps@8° ILDA, max. 60°
Max. Scan Angle 50°
Laser Source RSL modules
Laser Class 4
Operation Modes LAN, ArtNet, ILDA streaming, integrated SD card, stand-alone; integrated intelligent ShowNET laser mainboard with display
Basic Patterns over 120 (layers, tunnels, fences, waves, etc.)
Accessories Incl. power cable, manual, E-Stop, interlock connector, full version Showeditor software license included
IP rating IP65
Power Supply 85 V - 250 V / AC
Power Consumption 400 W
Dimensions 800/370/260 mm
Weight 24.0 kg