elumen8 Titan Zoom Wash T1 IP65 7 x 40W RGBL LEDs

Further expanding the Titan range, the Zoom Wash T1 is an IP65 rated fixture with a lightweight, compact, durable housing specifically designed for wet, dusty, and sandy conditions. Designed for both rental and installation applications, the fixture is equipped with 7 x 40W RGBL LEDs along with super-fast and quiet motors for precision movements. When used at its narrowest 3.5 degree zoom, sharp mid-air effects can be created whilst at its widest 44 degrees wide washes can bathe venues and stages in rich colours. The addition of lime in the LEDs produces a high CRI of 85Ra, and the central LED can be controlled separately to the outer LEDs, whilst an the RGB halo produces a range of eye-candy effects. The Titan Zoom Wash T1 has an adjustable refresh rate perfect for TV and film, it also features 3 selectable fan speeds including a studio mode with a 32.7dB noise level for noise sensitive applications. A range of preset colour macros, ring programs along with colour temperature presets further bolsters this fixtures offering.

Specifications:

Power consumption: 320W
Power supply: 100~240V 50/60Hz
Fuse: T6.3A 250V
IP rating: IP65
Noise level @ 1m (no movement): Studio – 32.7dB, Power – 41.6dB, Live – 41dB
Noise level @ 1m (with movement): Studio – 47.7dB, Power – 50.8dB, Live – 50.5dB
Dimensions (H x W x D): 369 x 290 x 227mm
Weight: 9.8kg

Features:

2 year warranty
7 x 40W quad-colour LEDs (RGBL)
46 x tri-colour 3535 SMD LEDs (RGB)
Adjustable beam angle: 3.5°- 45°
3.5° - 82,723 Lux @ 2m (full on), 45° - 2,040 Lux @ 2m (full on)
CRI: >85Ra
Refresh rate: 5 selectable presets between 12kHz-25kHz
Motorised zoom
Pixel zone mapping
DMX channels: 9/13/14/20/28/32 or 37 selectable
Wireless control (W-DMX Sweden transceiver)
Auto, manual control and master/slave modes
Built-in colour macros and patterns
Colour temperature presets
Pan/tilt auto correction
16-Bit pan/tilt positioning
Pan: 540°, Tilt: 220°
0 - 100% dimming
4 dimming curves: Linear, square law, inverse square law and S-curve
Variable strobe
PowerTwist TR1 input/output
5-Pin XLR input/output
3-Pin XLR input/output
RDM (Remote Device Management)
4 button menu with 2.4” TFT display
Display battery backup for offline configuration
Supplied with quick release omega clamps
USB-C port (firmware updates)
3 selectable fan modes (live, power and studio)