DAP NRG-15 Passive 15” Full-range Speaker 550w Peak

Description:

The DAP NRG-15 is a passive full-range loudspeaker rated at 550 watts peak (150 watts continuous RMS). It uses a 15” woofer and a 1” compression driver. With a sensitivity of 96 dB/W/m, the NRG-15 comfortably plays up to 118 dB with peaks of up to 130 dB. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The woofer has a low cut-off point of 50 Hertz (-6 dB).
The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. It uses 4-pole speaker in and thru connectors and offers an additional 4-pin terminal connector, which is especially useful for permanent installation applications. To get the most out of the NRG-15, we recommend using a 4th order high-pass filter at 50 Hertz and adding an NRG series subwoofer.

Specifications:

Inputs
RMS Input Power 150 W
Peak Input Power 550 W
Passive Input Connection Speaker Connector 4 pole , Terminal
Outputs Passive Output Connector Speaker Connector 4 pole
Audio Specifications
Speaker System 2-way
Speaker Sensitivity (1 W/1 m) 96 dB
Speaker Impedance 8 Ω
Maximum SPL at 1 m 118 dB
Frequency Response (-6 dB) Minimum 50 Hz
Frequency Response (-6 dB) Maximum 20000 Hz
Woofer Diameter 15"
Woofer Voice Coil Diameter 2"
Woofer Magnet Type Ferrite
Compression Driver Diameter 1"
Compression Driver Voice Coil 1.4"
Compression Driver Magnet Type Ferrite
Dispersion Angle (Horizontal) 90°
Dispersion Angle (Vertical) 60°
Mechanical Specifications
Height (mm) 680 mm
Width (mm) 440 mm
Depth (mm) 460 mm
Material Plywood
Weight 20.2 kg
IP Rating IP20 (indoor use only)
Colour Black
Finish Painted
Speaker Adapter Diameter 35 mm
Product Properties
Useable as Monitor/Wedge No
Speaker Grille Material Steel
Speaker Handle Positions Left side, Right side
Rigging
Rigging Eye Thread M10
Thermal Specifications
Maximum Ambient Temperature 40 °