Chauvet Professional Logic Drive 2X Power and Control Unit for Logic Fixtures POE 1U

Description:

Logic Drive 2X Power and Control Unit for Logic Fixtures POE 1U

The Logic Drive 2X is designed to feed power and control to remote fixtures using the POE latest standard IEEE 802.3bt (power over Ethernet) and TCP/IP for control. It has 2 ports and will support a maximum of 92.5 W/port. The Drive 2X includes one LOGIC Wall Con, which is a single gang wall controller that can recall up to 8 recorded scenes from the Drive 2X. Additional Wall Cons may be added to the system, up to 4 pcs on a single controller to have multiple control locations. The Drive 2X supports DMX, Art-Net, and sACN control protocols, and includes an integrated webserver to configure the date/time settings, which are used in the daily/calendar trigger.

Features:

Power and Control Unit for Logic Fixtures
Uses the POE latest standard IEEE 802.3bt (power over Ethernet) and TCP/IP for control
2 ports and will support a maximum of 92.5 W/port
Includes one LOGIC Wall Con single gang wall controller
Supports DMX, Art-Net, and sACN control protocols
Includes an integrated webserver to configure the date/time settings, which are used in the daily/calendar trigger

Specifications:

Control Specifications
Control Protocol: USITT DMX-512a, Art-Net, sACN, RDM, Art-RDM
Operating Modes: Selectable in connected fixtures
Standalone Control: Yes
Fixture setup: Display, RDM, Art-RDM (Artistic License DMX Workshop)
Data Connection:Device Data Input: 1 Ethernet (RJ45) and 1 (5-pin) Phoenix connector
Device output support: POE++, IEEE 802.3bt, type 4, up to class 8
Device Data throughout: 1 Ethernet (RJ45) and 1 (5-pin) Phoenix connector
Wired remote input: 1 (12-pin) Phoenix connector
Construction/Physical
Dimensions: 10.31 x 9.64 x 1.81 in (262 x 245 x 46 mm)
Weight: 4.6 lb (2.1 kg)
Fixture Colour: Black
Housing Material: Stamped steel
Mounting Options: 1U Rack Mount, wall mount via X-slots on bottom of drive housing
Electrical
Input Voltage: 100 t240 VAC, 50/60 Hz (auto-ranging)
Power and Current: 260 W, 2.6 A @ 100 V
260 W, 2.17 A @ 120 V
260 W, 1.25 A @ 208 V
260 W, 1.14 A @ 230 V
260 W, 1.09 A @ 240 V
Output port power rating: 92.5 W per port
Output port voltage: 54 VDC
Power Supply: Electronic internal
Dimmer: Electronic
Power Linking: N/A
Power Connection: Seetronic TRUE1 power cord
Power/Data Connection:RJ45 In/Thru Control (2)
RJ45 Out POE (2)
Phoenix Out DMX/RDM (2)
Phoenix In WALLCON (1)
Recommended Power Cable: 3 x 14 AWG
Required Cable SpecificationsCable type: CAT6/A, shielded
Conductor Diameter: ≥23 AWG (≥0.5733 mm)
Conductor Material: Solid Bare Copper Wire (stranded not supported)
Cable Terminator: RJ45, CAT6/A, Shielded
Cable Length(s) Supported:Total Max Cable Length (Drive to first fixture): ≤100 m / 328 ft
Total Max Cable Length (Drive to last fixture): ≤140 m / 460 ft 
Total Max Cable Length (first fixture to last fixture): ≤40 m / 131 ft
Recommended Ethernet Cable for POE connections (or equivalent): Belden 2413F, 2412F
Thermal Specifications
Cooling: Fan-assisted convection
Operating Temperature Range: -4 °F t113 °F (-20 °C t45 °C)
Maximum Surface Temperature: 158 °F (70° C)
Minimum Distance to Flammable Surface: 11.8 in (0.3 m)
BTU/hr: 887
Regulatory & Voluntary Qualification
US Safety: UL 2108, UL 1598A
Canadian Safety : CSA-C22.2 No. 250.2
CE, MET, FCC, ROHS
Environment: Dry location, IP20Please refer to the User Manual for more detailed information on installation.
Warranty: 36-month manufacturer’s limited warranty (for covered regions only)
Installation Orientation: Any, vertical only, horizontal only