Amp Set MK2 for Line-Array S

PSSO DDA-1700 Amplifier

Stereo PA amplifier with SMPS, 2 x 850 W / 4 ohms

• Stereo PA amplifier with class D circuitry
• Low weight and height due to integrated switch mode power supply
• Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
• Limiter and speaker switch-on delay
• 3 operating modes can be selected (stereo, parallel or bridged)
• 2 calibrated level controls for precise level adjustment
• Input sensitivity adjustable
• LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
• Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
• Speaker outputs via lockable speaker jacks
• Rugged steel chassis with aluminum front panel
• Air flow from front to rear
• The device is cooled by 2x temperature-controlled fan
• (19") 48.3 cm rack installation 2 U

PSSO QCA-6400 4-Channel SMPS Amplifier

PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms

• 4-channel PA amplifier with class I circuitry
• 4 x 1400 W/4 ohms
• Low weight and height due to integrated switch mode power supply
• Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
• 3 operating modes can be selected (stereo, parallel or bridged)
• 4 level controls
• Input sensitivity adjustable
• LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
• Speaker switch-on delay
• Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
• Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
• Speaker outputs via lockable speaker jacks
• Rugged steel chassis with aluminum front panel
• Rack installation, 2 U
• Neutrik Speakon outputs
• Air flow from front to rear
• The device is cooled by 2x temperature-controlled fan
• (19") 48.3 cm rack installation 2 U

PSSO DXO-26 PRO Digital Controller

Digital speaker management system with real-time network communication, 2 inputs and 6 outputs

• Digital network speaker management system with 64-bit processing
• Premium components ensure excellent sound-features
• Flexible routing configurations for all standard mono and stereo output operating modes
• 2 analog inputs and 1digital AES/EBU interface (XLR)
• 6 analog outputs (XLR)
• 10-band parametric EQ per input and output
• Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
• Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
• The intelligent software for PC and Mac allows convenient control with a computer
• Full configuration and real-time network communication via the built-in Ethernet interface
• Presets are easy to store, transfer and manage
• Up to 80 user presets storable in the device via software
• Control of all functions also possible via the controls at the front panel
• Alphanumeric LCD screen with 2 lines of 16 characters each
• Input sensitivity digitally adjustable
• Inputs and outputs with 4-digit VU meter
• Mute switch with LED indicator per output
• Up to 2000 ms signal delay adjustable for the inputs and outputs
• Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
• Switchable phase
• Lock function for prevents undesired changes to settings
• Rack installation, 1 U
• Windows XP, Vista, 7, 8, 10 and Mac OS X 10.5.8 and better
• Control your speaker systems more flexible than ever with the DXO Control app
• DXO Control for iPad supports all functions of the PC software and is available for free from the app store
• Digital signal processor
• Controlling by DXO-Control App
• The device can be connected via USB to the PC in connection with DXO Software The device can be connected via RJ-45 (F) mounting version to the PC in connection with DXO Software
  The firmware can be updated via the PC connection
• (19") 48.3 cm rack installation 1 U

OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U

U-front panel in different sizes

• 1 mm steel, black, powder-coated
• Weight 465-1350 g (depending on the version)
• 1 U

ROADINGER Rack Profi KM 6U 55cm with wheels

PRO flightcase for 483 mm devices (19")

• Stomped profile rails for cage nuts
• Available in different height units (1 U = 44 mm)
• High-quality workmanship with birch multiplex 9 mm, dark brown, laminated
• Aluminum profile frames 30mm with rounded edges
• 2 hinged, chromium plated case handles
• 4 high-quality butterfly locks
• With 4 castors with 2 locking brakes
• With 4 built-in stacking trays in the cover
• With profile rails suitable for (19") approx. 48 cm units
• With extra large installation depth
• 6 U
• Made in Europe
• PSSO DDA-1700 Amplifier
• Power supply: 100-240 V AC, 50/60 Hz
• Power consumption: 150 W 1/8 power
• Output power: 2 x 850 W RMS (4 ohms)
• 2 x 500 W RMS (8 ohms)
• 1 x 1700 W RMS bridged (8 ohms)
• Power connection: Mains input P-Con (blue), mounting version power supply
• cord with safety plug (provided)
• Frequency range: 20 - 20000 Hz
• S/N ratio: >100 dB
• THD: <0,15 % at 1 kHz
• Cooling: 2 x temperature-controlled fan , Air flow from front to rear
• Impedance: Input 10 kOhm , unbal.
• Input 20 kOhm , bal.
• Gain: 38,2 dB
• Circuitry: Class D
• Slew rate: >10 V/µs
• Damping factor: >500
• Control elements: Power switch, level control per channel, mode switch
• (stereo/parallel/bridged), limiter selector, Input sensitivity switch
• Controls: Softstart overheat overload short-circuit limiter progressive volume
• VHF DC voltage
• Status LED: Power, level meter, clip, protect
• Connections: Input: line via 2 x 3-pin XLR
• Output: line via 2 x 3-pin XLR
• Output: speakers via 2 x speaker built-in socket (F)
• Input sensitivity: 0,775 V 1,0 V 1,81 V , switchable 32 dB 37 dB 39,3 dB ,
• switchable
• Housing design: (19") 48.3 cm rack installation 2 U
• Dimensions: Width: 48,3 cm
• Depth: 30,7 cm
• Height: 8,9 cm
• Weight: 6,00 kg
• PSSO QCA-6400 4-Channel SMPS Amplifier
• Power supply: 230 V AC, 50 Hz
• Power consumption: 820 W 1/8 power
• Output power: 4 x 1600 W RMS (2 ohms)
• 4 x 1400 W RMS (4 ohms)
• 4 x 800 W RMS (8 ohms)
• 2 x 3200 W RMS bridged (4 ohms)
• 2 x 2800 W RMS bridged (8 ohms)
• Power connection: Fixed power supply cord with safety plug
• Frequency range: 20 - 20000 Hz
• S/N ratio: >80 dB
• THD: <0,05 % at 1 kHz
• Cooling: 2 x temperature-controlled fan , Air flow from front to rear
• Impedance: Input 20 kOhm , bal.
• Input 10 kOhm , unbal.
• Gain: 40,3 dB/ 0,775 V
• 38 dB/ 1,0 V
• 35,1 dB/ 1,4 V
• Circuitry: Class I
• Slew rate: >10 V/µs
• Damping factor: >800
• Crosstalk: >65 dB
• Control elements: Power switch, level control per channel, mode switch
• (stereo/parallel/bridged), Input sensitivity switch
• Controls: Overheat overload short-circuit DC voltage softstart VHF
• Status LED: Power, level meter, clip, protect
• Connections: Input: line via 4 x 3-pin XLR
• Link: line via 4 x 3-pin XLR
• Output: speakers via 4 x speaker built-in socket (F)
• Input sensitivity: 0,775 V 1,0 V 1,4 V , switchable 26 dB 32 dB 38 dB ,
• switchable
• Housing design: (19") 48.3 cm rack installation 2 U
• Dimensions: Width: 48,3 cm
• Depth: 44,5 cm
• Height: 8,9 cm
• Weight: 13,45 kg
• PSSO DXO-26 PRO Digital Controller
• Power supply: 100-240 V AC, 50/60 Hz
• Power consumption: 10,00 W
• Power connection: Mains input IEC connector (M) mounting version power
• supply cord with safety plug (provided)
• Frequency range: 10 - 40000 Hz
• THD: <0,005 % at 1 kHz
• Network connection: Protocol: Ethernet TCP/IP via 1x RJ-45 (F) mounting
• version
• DSP: Digital signal processor
• Crossover frequency: 20-20000 Hz
• Impedance: Input 10 kOhm
• Input XLR (AES/EBU): 110 Ohm
• Output 50 Ohm
• Gain: Input: -50 dB to +12 dB
• Output: -50 dB to +12 dB
• Filter: Linkwitz-Riley Butterworth Bessel 6db/oct 12db/oct 18db/oct 24db/oct
• Delay: 0 - 2000 ms
• Dynamic range: Input: 118 dB
• Output: 114 dB
• Control: DXO-Control App
• Sample rate: 65 kHz
• Connections: Input: line via 2 x 3-pin XLR
• Output: line via 6 x 3-pin XLR
• Max. level: Input: +22 dBu
• Output: +12 dBu
• USB port: Typ B
• PC connect: DXO Software via USB
• DXO Software via RJ-45 (F) mounting version, firmware can be updated
• Housing design: (19") 48.3 cm rack installation 1 U
• Dimensions: Width: 48,3 cm
• Depth: 22,3 cm
• Height: 4,45 cm
• Weight: 2,30 kg
• OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
• Diameter mounting holes: 7 mm
• Material thickness: 1 mm
• Mounting height: Approx. 4.5 cm (1 U)
• Housing design: 1 U
• Dimensions: Width: 48,3 cm
• Height: 4,45 cm
• Weight: 300 g
• ROADINGER Rack Profi KM 6U 55cm with wheels
• Maximum load: 50 kg
• Aluminum profile frames: 30 mm
• Case handles: 2 pc/pcs
• Lock: Butterfly lock: 4 pc/pcs
• Transport aid: 4 x castors with 2 locking brakes
• 4 x built-in stacking trays in the cover
• Material: Birch multiplex, 9 mm
• Color: Dark brown, laminated
• Front panel width: (19") approx. 48 cm
• Mounting height: Approx. 26,5 cm (6 U)
• Mounting depth: 550 mm
• Housing design: 6 U
• Dimensions: Width: 53 cm
• Depth: 71 cm
• Height: 43 cm
• Weight: 20,00 kg