Neutrik NA-2I2O-DLINE 2x2 I/O interface with Dante

Description:

Connect your legacy audio gear to the DANTE® world. The Line I/O to DANTE® Interface is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a DANTE® network. Simultaneously, NA-2I2O-DLINE converts a DANTE® stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the DANTE® network while at the same time receiving a mix from another DANTE® source.

Line I/O to DANTE® Interface is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional
mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

Features:

Connect analog audio equipment to a Dante® network
Feed non Dante® ready amplifiers, speakers or mixing desks with signals from the Dante® network
AES67 compliant
Improved Audio Parameters
Enhanced ESD Protection
LED Ring for Status Indication
Extremely robust and compact design for rugged stage conditions
Rack mountable
Requires a Power over Ethernet switch or a PoE injector (802.3 af/at; class 1)

Specifications:

Title: NA-2I2O-DLINE
Product family: Line I/O to Dante Interfaces

Electrical
Power consumption: < 2 watts
Power supply: PoE switch (Power over Ethernet) or PoE injector (according to IEEE 802.3af/at/bt)

Mechanical
Weight: 0.44 kg (1 pound)
Dimensions (with rubber protection): l = 164 mm (6.3 inches), w = 82 mm (3.2 inches), h = 51 mm (2.0 inches)
Dimensions (without rubber protection): l = 151 mm (5.9 inches), w = 66 mm (2.6 inches), h = 41 mm (1.6 inches)

Environmental
Standard compliance: REACH EC 1907/2006, Directive 2011/65/EU, IEC 62368-1:2018, IEC 62368-1:2023, EN IEC 62368-1:2020+A11:2020, UL 62368-1:2019, UL 62368-1:2021, CSA C22.2 No. 62368-1:19
Ingress protection class: IP20
Temperature range: –5°C to +60°C
Storage temperature: –40°C to +150°C

Dante specifications
Channels: 2 INPUTS (line level), 2 OUTPUTS (line level)
Supported sampling rates: 44.1 / 48 / 88.2 / 96 kHz
Bit depth: 16, 24 and 32 Bit
Latency: Depending on the network configuration, 1 ms (standard)
Ethernet connection: 100 BASE-TX (PoE support)

Analog audio input
Input impedance: 6.6 kOhm
Input level (balanced): 24 dBu max.
Frequency response: 20 Hz to 20 kHz (+/-0.5 dB)
Dynamic range: > 100 dB
Signal-to-noise ratio: > 108 dB
THD + noise: 0.01 % @ + 4 dBu, A-weighting
Crosstalk: -110 dB @ 20 kHz

Analog audio output
Output impedance: < 150 Ohm
Output level (balanced): 24 dBu max.
Frequency response: 20 Hz to 20 kHz (+/-0.5 dB)
Dynamic range: > 100 dB
Signal-to-noise ratio: > 108 dB
THD + noise: < 0.01 % @ + 4 dBu, A-weighting
Crosstalk: -100 dB @ 20 kHz